Professional grade Tascam UH-7000 HDIA Mic Preamp USB Audio Interface
USD $310.00
Condition : Used
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
SOFTWARE NOT INCLUDED, UNTESTED BUT POWERS ON. FROM TASCAM: The UH-7000 is a professional-grade mic preamp/audio interface that extensively pursues low noise and high sound quality. Not only can it be used as a 4IN/4OUT interface in a DAW production environment, it can also be used as a standalone mic preamp/ADDA converter. A newly-designed HDIA mic preamp was installed in order to establish hardware with low noise and high sound quality. The result is a high-level audio performance of −128dBu EIN, a 117dB signal-to-noise ratio and distortion ratio of 0.0009% or less.
Spec description Sampling frequency 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Quantization bit rate 24bit Analog audio inputs ANALOG LINE IN 1/2 Connecter 6.3mm(1/4") TRS-jack(T:HOT, R:COLD, S:GND), BALANCED Input impedance 15kohms Maximum input level +26.5dBu Minimum input level -38dBu ANALOG MIC IN 1/2 Connecter XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED Input impedance 2.2kohms Maximum input level +2dBu Minimum input level -60dBu Analog audio outputs ANALOG LINE OUT 1/2 Connecter XLR-3-32(1:GND, 2:HOT, 3:COLD), BALANCED Output impedance 100ohms Maximum output level +24dBu Digital audio inputs AES/EBU Connecter XLR-3-31(1:GND, 2:HOT, 3:COLD) Formats IEC60958-3 (S/PDIF), IEC60958-4 (AES/EBU) Sampling frequencies 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Digital audio outputs AES/EBU Connecter XLR-3-32(1:GND, 2:HOT, 3:COLD) Formats IEC60958-3 (S/PDIF), IEC60958-4 (AES/EBU) Sampling frequencies 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz PHONES Connecter 6.3mm(1/4") stereo phone jack Maximum output 45mW+45mW or more(THD+N 1% or less, 32ohms loaded) USB Connecter USB B type 4-pin Format USB 2.0 High Speed (480 Mbps), Full Speed (12 Mbps) Power AC100-240V, 50/60Hz Power consumption 15W Dimensions 214(W)×81.2(H)×233(D)mm 8.4(W)×3.2(H)×9.2(D)inch Weight 2.2 kg, 4.85 lb Operating temperature 5˚C to 35˚C Audio performance ADC chip set dynamic range 123dB (A-weighted) DAC chip set dynamic range 123dB (A-weighted) Frequency response 20Hz to 80kHz +0.005dB/-0.16dB (mic preamp for all sampling frequencies) THD 0.0009% or less(MIC to AD) S/N ratio 117dB (MIC to AD) EIN -128dBu
*SAM
Spec description Sampling frequency 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Quantization bit rate 24bit Analog audio inputs ANALOG LINE IN 1/2 Connecter 6.3mm(1/4") TRS-jack(T:HOT, R:COLD, S:GND), BALANCED Input impedance 15kohms Maximum input level +26.5dBu Minimum input level -38dBu ANALOG MIC IN 1/2 Connecter XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED Input impedance 2.2kohms Maximum input level +2dBu Minimum input level -60dBu Analog audio outputs ANALOG LINE OUT 1/2 Connecter XLR-3-32(1:GND, 2:HOT, 3:COLD), BALANCED Output impedance 100ohms Maximum output level +24dBu Digital audio inputs AES/EBU Connecter XLR-3-31(1:GND, 2:HOT, 3:COLD) Formats IEC60958-3 (S/PDIF), IEC60958-4 (AES/EBU) Sampling frequencies 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Digital audio outputs AES/EBU Connecter XLR-3-32(1:GND, 2:HOT, 3:COLD) Formats IEC60958-3 (S/PDIF), IEC60958-4 (AES/EBU) Sampling frequencies 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz PHONES Connecter 6.3mm(1/4") stereo phone jack Maximum output 45mW+45mW or more(THD+N 1% or less, 32ohms loaded) USB Connecter USB B type 4-pin Format USB 2.0 High Speed (480 Mbps), Full Speed (12 Mbps) Power AC100-240V, 50/60Hz Power consumption 15W Dimensions 214(W)×81.2(H)×233(D)mm 8.4(W)×3.2(H)×9.2(D)inch Weight 2.2 kg, 4.85 lb Operating temperature 5˚C to 35˚C Audio performance ADC chip set dynamic range 123dB (A-weighted) DAC chip set dynamic range 123dB (A-weighted) Frequency response 20Hz to 80kHz +0.005dB/-0.16dB (mic preamp for all sampling frequencies) THD 0.0009% or less(MIC to AD) S/N ratio 117dB (MIC to AD) EIN -128dBu
*SAM
Price type
IN STOCK
OUT STOCK
.
